Package Unit Repair & Maintenance in Aurora, MO
When your package unit stops heating or cooling your home, or when it is time for its seasonal tune-up, Heller Heat & Air is ready to help homeowners in Aurora and across our service area. One cabinet carries both seasons, so our technicians test the heating and cooling sides instead of only the mode that prompted your call. We service all brands, and as a YORK® Authorized Dealer we work directly with YORK® equipment.
Why Aurora Homeowners Call Our Package Unit Company
A package unit runs heating and cooling through one outdoor cabinet, so a single fault can show up in only one season. We check the cooling side and the heating side during each repair visit, then trace the symptom back to the component causing it. That keeps a fix in one mode from hiding a problem that will surface in the other.
Our team brings 40+ years of industry experience to package unit work. That background guides how we check the compressor, condenser coil, supply blower, and controls, and how we read the results. Experience also helps us tell a component that needs replacing from one that only needs adjustment.
A tune-up checks the cabinet before the next heating or cooling season, and it often reveals wear that is starting to affect performance. We can combine a tune-up with a repair visit when both are needed. The written findings show what was checked, what was adjusted, and what deserves attention later. Scheduling a tune-up while the cabinet still runs well also gives us a baseline for future visits.
Before any part is ordered, we explain what failed, why it failed, and which repairs are needed now versus later. You decide what gets done, and you can ask questions at every step. Our goal is for you to understand your cabinet well enough to choose with confidence.
We service all brands, so the nameplate on your package unit does not decide whether we can help. As a YORK® Authorized Dealer we know YORK® equipment closely, and we apply the same honest testing to any other make. We keep the diagnosis focused on your cabinet, not on the brand badge. When a repair does not make sense for an aging cabinet, we say so plainly.
Heller Heat & Air is an Aurora Chamber of Commerce member and BBB Accredited. Those affiliations are public, and we are glad to explain what they mean for your service. You can also read our company background before you call.
Send Us the Symptoms Your Package Unit Shows
Describe what the system is doing, whether the trouble shows up in heating, cooling, or both, and the best way to reach you. Our team will follow up to plan your visit, and our technicians come to your home to test the cabinet, so the details you share help them arrive prepared. If you are still weighing options, you can review package unit installation, all of our package unit services, or central AC repair before you reach out to our office.
Reach Out to Our Team
Flexible HVAC Financing in Aurora, MO
Synchrony financing makes it easier to move forward with a new air conditioner, furnace, heat pump or mini-split without putting your whole budget on hold. You can apply online in a few minutes, or contact our team and we’ll walk you through your options.
Comfort Club
$159 A Year- Spring safety & efficiency inspection
- Fall safety & efficiency inspection
- Prevent most breakdowns before they occur
- Computerized service history of all equipment
- 10% discount on all parts and labor for all repairs
- Priority service
- Bonus bucks
If you have more than one system, add $30 per additional system
Ready to Get Started?
Contact Heller Heat & Air today to schedule service or ask a question. We’re here to help keep your home comfortable all year.
Signs a Package Unit Needs a Repair Visit
These patterns most often mean the cabinet needs a professional look. None of them proves a specific fault on its own, so we test before we diagnose.
Uneven Heating or Cooling Between Rooms
Some rooms run warm in summer or cold in winter while others track the thermostat. Airflow restrictions in the ducts, a weak supply blower, or a cabinet that has lost capacity can each produce that pattern. Note which rooms are affected and whether the imbalance has grown over time.
Cabinet Runs Without Reaching the Thermostat Setting
If the system runs for long periods and the house never reaches the setting, the cabinet may be losing capacity. A weak run capacitor, a low refrigerant charge, or a dirty condenser coil can all reduce output. Watch whether the problem appears on hot afternoons, cold mornings, or both.
Heating Section Shuts Off Early or Will Not Start
When the heating side cycles off before the room warms, or it never starts on a cold call, a safety control may be responding to a real condition. These controls shut the system down to protect it, so a repeated shutdown deserves a full inspection. Avoid resetting the system again and again without a technician’s review.
Loud Noises From the Cabinet
A grinding, squealing, or rattling sound from the cabinet can point to a motor bearing, a loose panel, or a fan that is out of balance. A humming outdoor unit that struggles to start can mean the capacitor or compressor is under strain. Note when the noise happens and where it comes from.
Ice on the Coil or Refrigerant Lines
Frost or ice on the outdoor coil, the refrigerant lines, or the indoor coil means airflow or refrigerant is out of balance. Ice that keeps coming back after it has been cleared points to a deeper cause than the ice itself. Turn the system off at the thermostat and contact our office instead of chipping the ice away.
Musty Odors or Water Near the Cabinet
A musty smell when the blower starts, or water pooling around the base, can indicate a blocked condensate line, a clogged drain pan, or moisture collecting where it should drain. Standing water can damage the pad and encourage mold, so note where the water appears and how long it has been there.
Each Package Unit Visit, Start to Finish
A package unit visit checks both halves of the cabinet before any part is changed. The five steps below show how our team works through each call, from the first conversation to the final test.
Symptom Intake and Equipment Record
We start by learning how the problem appears and gathering the details that identify your cabinet. That history points the technician toward the right components before any panel is removed.
- Record which rooms are affected and whether the trouble happens in heating, cooling, or both
- Note the outdoor temperature when the problem appears and whether it comes and goes
- Capture any codes or flashing lights shown on the thermostat or control board
- Gather model and serial numbers from the cabinet’s data plate when they are available
- Review the thermostat settings and any changes made since the last service
- Plan the visit so the technician arrives ready to test both halves of the unit
Two-Sided Operating Check
Our technicians come to your home and run the cabinet through its heating and cooling operation. Comparing readings on both sides shows whether a fault is confined to one component or shared across the system.
- Run the cooling side and compare the temperature split across the indoor coil
- Run the heating side through a full cycle and observe how it starts and stops
- Measure airflow at the supply registers and inspect the return grille and filter
- Check the supply blower’s operation, speed settings, and electrical connections
- Watch the condenser fan and the run capacitor under load
- Note any reading outside the expected range before moving on to component tests
Component Testing and Diagnosis
Once the operating check points toward a cause, we test the parts that could produce the symptoms. We do not replace components until measurements support that decision.
- Test the run capacitor and contactor for correct operation under load
- Inspect the condenser coil for dirt, bent fins, and restricted airflow
- Evaluate the refrigerant circuit for signs of a leak or an improper charge
- Check the compressor’s electrical supply, start components, and running behavior
- Test the safety switches and limit controls that protect the heating section
- Inspect the supply and return connections for leaks, disconnected joints, and undersized runs
Plain-Language Review of Repair Options
After diagnosis, we walk through the findings and the repair options in terms you can act on. You make the decision with the facts in front of you.
- Show you the failing component and explain its role in heating or cooling
- Explain the likely cause and whether other parts may be stressed by it
- Outline each repair option and the work it involves
- Separate repairs needed now from those that can reasonably wait
- Say plainly when a repair would not make sense for an aging cabinet
- Review financing options with you if the approved work is a larger investment
- Answer every question before any work is approved
Final Readings and Findings Summary
Before we leave, we confirm that the cabinet runs correctly on both sides and leave you with a written summary. A clear record helps you and any future technician understand the system’s history.
- Record the operating readings taken before and after the repair
- Confirm heating operation, cooling operation, and blower performance during the final test
- Provide a written summary of the work completed and the parts replaced
- Share manufacturer warranty information for any replaced parts that carry coverage
- Point out wear items that should be checked at the next seasonal visit
- Explain how the Comfort Club maintenance plan keeps the cabinet tuned for both seasons
Package Unit Parts We Repair and Service
Supply Blower and Motor Service
The supply blower moves air in both seasons, so a weak or noisy blower affects every room. We test the motor, wheel, and controls first.
Ask about blower serviceRun Capacitor Testing and Replacement
A weak run capacitor can keep the fan or compressor from starting or running well. We test it under load and replace only the part that is failing.
Request a capacitor checkCondenser Coil Cleaning and Repair
A dirty or damaged outdoor coil reduces heat transfer in both seasons. We clean it carefully and repair bent fins or leaks where practical.
Schedule a coil inspectionHeating Section Inspection and Repair
The heating section needs regular inspection as it ages. We test its safety controls, airflow, and operating sequence before changing any component.
Discuss heating section serviceSafety Switch and Limit Control Testing
Safety switches and limit controls protect the cabinet from unsafe conditions. We test each one to confirm it responds correctly, then explain any repair before work begins.
Ask about safety control testingThermostat Compatibility Checks
A thermostat that does not match the cabinet’s control needs can cause short cycling or uneven comfort. We check wiring, settings, and compatibility.
Request a controls reviewSupply and Return Connection Checks
Leaks or disconnected joints at the supply and return can cut the airflow the cabinet delivers. We check each connection and explain which repairs would improve airflow.
Ask about airflow connectionsSeasonal Tune-Up Service
A tune-up checks both halves of the cabinet before the next heating or cooling season. We clean what needs cleaning, test controls, and review wear items.
Plan a tune-up with our team
Package Unit Repair Questions Answered
Weak airflow usually points to a restriction, a blower problem, or a clogged filter rather than a failed heating or cooling section. Check the filter first and confirm that supply registers and return grilles are open. If the air stays weak, we test the blower, its controls, and the ductwork. We explain each finding before any work.
A run capacitor gives the blower and condenser fan motors the boost they need to start and run smoothly. When it weakens, a motor may hum, start slowly, or quit after running for a while. Because we test the capacitor under load, we replace it only when testing confirms the failure.
Heating sections include safety controls that shut the system down when a condition falls outside its safe range, such as restricted airflow or overheating. A shutdown is a signal to have the system inspected, not a reason to keep resetting it. We test the safety switches, airflow, and operating sequence to find the trigger.
Yes, a tune-up often reveals wear that has not yet caused a failure. Technicians check electrical connections, controls, airflow, and the coils, then note items that deserve attention at a later visit. A tune-up cannot prevent every breakdown, but it gives you a documented starting point. Ask us about ongoing visits when you book.
Ice on a coil usually means airflow is too low or the refrigerant circuit is out of balance. A dirty filter, restricted return air, or a slow blower can let the coil run colder than it should. Turn the system off at the thermostat and contact our office so both airflow and refrigerant can be tested.
Many systems use a short fan delay that keeps air moving after heating or cooling stops. A brief run after shutdown is normal. If the blower runs for a long period or never stops, the fan control or thermostat setting may need review. We check those settings during the visit.
Describe what you hear, when it happens, and which side of the cabinet it comes from. A grinding or squealing noise, a humming outdoor unit that will not start, and a rattle that changes with airflow each point to different parts. Note whether it happens during heating, cooling, startup, or shutdown.
A musty smell often comes from moisture that stays in the drain pan, condensate line, or coil area between cycles. Clearing the drain path and inspecting the coil and drain pan usually comes first. Keep debris away from the cabinet, and tell us how long the smell has been present.
Yes. Because one cabinet houses both functions, we test the heating and cooling sides during a repair visit even when only one mode seems affected. Some faults, such as a weak capacitor or restricted airflow, can affect both modes. We report what we find on each side separately, so you know which repairs address which symptoms.
A package unit places heating and cooling components in one outdoor cabinet, so parts share airflow, electrical supply, and an enclosure. A split system divides many of those parts between indoor and outdoor equipment. Diagnosis therefore traces causes that can cross between the two sides. We explain how the cabinet and its ductwork work together before recommending any repair.
If Your Home Uses a Different System
Some homes pair a package unit with other equipment, and some homeowners are still comparing options. Each system below has its own page, so you can see how our technicians approach it and compare the options before you decide. Some homeowners also want to know what a visit involves for a different unit, and these pages answer that.
-
Ducted heat pump repair
Two-mode diagnosis for ducted heat pumps.
-
Furnace repair
Heating diagnosis and airflow checks for furnaces.
-
Mini-split repair
Zone-by-zone testing for ductless systems.
-
Rooftop unit repair
Service for light commercial rooftop units up to 25 tons.
-
Humidifier and dehumidification options
AprilAire choices for indoor humidity.
What Aurora Homeowners Say About Us
Our reputation was built one service call at a time. Here’s what our neighbors in Aurora and the surrounding area have to say about working with Heller Heat & Air.
Package Unit Visits Across Our Service Area
Aurora is our home base. Start with the Aurora services page for local details, or see the service area overview for every community we serve.
- Aurora HVAC service
- Mount Vernon HVAC service
- Monett HVAC service
- Shell Knob HVAC service
- Marionville HVAC service
- Verona HVAC service
- Pierce City HVAC service: contact us
- Purdy HVAC service: contact us
- Miller HVAC service: contact us
- Crane HVAC service: contact us
- Billings HVAC service: contact us
- Leann HVAC service: contact us
Additional Communities Served
Don’t see your town listed? We regularly travel beyond these communities, so give us a call and we’ll let you know if we can help.
A Heating and Cooling Contractor That Explains Before It Repairs
A package unit that is not heating or cooling your home evenly deserves a careful look at both halves of the cabinet. At Heller Heat & Air, we bring 40+ years of industry experience, YORK® Authorized Dealer knowledge, and plain-language findings to every repair and tune-up. Many package unit problems become clear once the right test is run, and the rest deserve patience before any part is changed.
If your cabinet needs attention, or you want a seasonal tune-up before the next heating or cooling season, contact our team and we will get you scheduled. We will answer your questions before anything is approved, so you know what is being done and why.
