Heller Heat & Air provides mini-split repair service

Ductless Mini-Split Repair

Mini-Split Repair & Maintenance in Aurora, MO

When a ductless system stops cooling one room, leaves another room cold in winter, or starts dripping from an indoor unit, Heller Heat & Air is ready to help homeowners in Aurora and across our service area. A mini-split serves each room through its own indoor unit, so our technicians test every indoor unit and the shared outdoor unit rather than only the room that prompted your call. We service all brands, and as an LG Premier Dealer we know LG mini-split equipment well.

Our Ductless Approach

A Ductless Repair Company That Tests Every Zone

Technician checking a ductless mini-split outdoor unit with gauges

Start Your Repair Request

Share What Your Rooms Are Doing

Describe the rooms that run too warm or too cold, whether the trouble shows up in cooling, heating, or both, and any sounds, water, or indicator lights you have noticed. Our technicians come to your home to test the system, so those details help them arrive prepared. If you are still weighing options, you can also review mini-split installation, all of our mini-split services, or ducted heat pump repair.

Reach Out to Our Team

Homeowners reviewing financing options with an HVAC advisor
Synchrony

Flexible HVAC Financing in Aurora, MO

Synchrony financing makes it easier to move forward with a new air conditioner, furnace, heat pump or mini-split without putting your whole budget on hold. You can apply online in a few minutes, or contact our team and we’ll walk you through your options.

Heller technician with a tablet inspecting a YORK® furnace

Comfort Club

$159 A Year
  • Spring safety & efficiency inspection
  • Fall safety & efficiency inspection
  • Prevent most breakdowns before they occur
  • Computerized service history of all equipment
  • 10% discount on all parts and labor for all repairs
  • Priority service
  • Bonus bucks

If you have more than one system, add $30 per additional system

Heller technician checking an outdoor air conditioner with refrigerant gauges

Ready to Get Started?

Contact Heller Heat & Air today to schedule service or ask a question. We’re here to help keep your home comfortable all year.

Warning Signs

Signs Your Ductless Zones Need Attention

These patterns most often mean a ductless system needs a professional look. Note what you see before you call, because the details help us plan the visit.

  • One Indoor Unit Stops Responding

    When one indoor unit ignores its remote while the others keep working, the fault is often in that unit’s receiver, its control wiring, or its power supply rather than the whole system. Check whether the unit’s display shows a code and whether the remote has fresh batteries. Note which room is affected and whether the outdoor unit is running at the same time.

  • Water Dripping From an Indoor Unit

    Water under an indoor unit usually points to a condensate drain that is blocked, disconnected, or sloped the wrong way. Standing water can stain walls and flooring and encourage mold if it goes unnoticed. Switch the unit off at its controller, then note where the water appears and how often it returns.

  • Ice Building on the Outdoor Unit

    A thin layer of frost during a heating defrost cycle is normal, but ice that builds across the outdoor coil or cabinet suggests a defrost problem, restricted airflow, or a refrigerant charge that is off. Do not chip at ice with tools. Clear snow and debris from around the cabinet, then call so a technician can find the cause.

  • One Zone Never Reaches Its Setting

    When one room stays warm in summer or cold in winter while the others respond normally, the cause may be a dirty filter, a restricted indoor coil, a weak indoor fan, or a refrigerant problem. Compare that room with the other zones and notice whether the air from its indoor unit feels weaker than usual. If the whole home is also struggling, a ducted heat pump may share part of the same airflow path, and we will test that too.

  • Short Cycling or Nonstop Running

    A system that switches off and on in short bursts, or one that runs without reaching its setpoint, is working harder than it should. Short cycling can come from a faulty sensor, an electrical part, or an airflow restriction. Nonstop running can signal a refrigerant issue or an outdoor unit that has lost capacity.

  • Buzzing, Clicking, or Burning Odors

    A low hum from the outdoor unit can be normal, but loud clicking, rattling, or a burning smell is not. Those sounds can come from a failing fan motor, a loose panel, or an electrical component that needs testing. Switch the system off at its controller, and describe the sound and when it happens.

Repair Visit Steps

Each Ductless Visit, Zone by Zone

A mini-split repair checks every zone before any part is changed. The five steps below describe how our team approaches each visit, from the first review of your symptoms to the written record you keep afterward.

Zone Symptom and Remote Review

We start by learning which rooms are affected and how the problem appears. That information tells the technician which indoor units to test first and which controls to check before panels are opened.

  • Record which rooms are affected and whether the problem appears in cooling, heating, or both
  • Review the remote or wall controller for error codes, flashing lights, or unexpected mode settings
  • Note the outdoor temperature when the problem appears and whether it comes and goes
  • Gather the model and serial numbers from each indoor unit and the outdoor unit when they are available
  • Check the filters and grilles in the affected rooms for blockage before the visit
  • Plan the visit around the zones that need testing so the technician arrives ready to work

Outdoor Unit and Line Set Inspection

The outdoor unit and the refrigerant line set work together for the life of the system. We examine both for airflow, damage, and connection problems before we test the components inside.

  • Check the outdoor unit for clearance, level mounting, and debris around the coil
  • Inspect the line set insulation and its protection for wear, cracking, or pest damage
  • Look for oil staining or other signs of a refrigerant leak at the connections
  • Confirm the outdoor fan turns freely and moves air across the coil
  • Check the electrical disconnect, wiring, and capacitor condition at the outdoor unit
  • Note any reading outside the expected range before moving on to component tests

Indoor Unit and Condensate Drain Testing

Each indoor unit is tested on its own, because the room it serves may hold the clue to the whole problem. We check the air path, the controls, and the drain for every zone that is affected.

  • Run each affected indoor unit in cooling and heating modes and confirm it responds to its controller
  • Measure airflow at the indoor unit and inspect the blower, filter, and coil for restriction
  • Check the temperature difference across the indoor coil in each mode
  • Inspect the condensate drain line, its slope, and any condensate pump for blockage or leaks
  • Test the temperature sensors that tell the system how each room is performing
  • Compare each zone with the others to separate a single-unit fault from a shared problem

Explaining the Findings Before Any Work

After testing, we explain what we found in plain language before any part is approved. You make the decision with the facts in front of you, not with a sales pitch.

  • Show you the failing component and describe its role in heating and cooling
  • Explain the likely cause and whether other zones or the outdoor unit may be affected
  • Outline the repair options and the work each one involves
  • Separate the repairs that are needed now from those that can wait
  • Say plainly when a repair would not make sense for an aging system
  • If the approved work is a larger investment, review financing options with you before anything is ordered

Zone Test Data, Written Record, and Warranty Documentation

Before we leave, we confirm that every affected zone operates correctly and document the work. A clear record helps you and any future technician understand the history of your system.

  • Record the operating readings for each zone before and after the repair
  • Confirm cooling, heating, fan speed, and drainage in every zone during the final test
  • Provide a written summary of the work completed and the parts replaced
  • Share manufacturer warranty information for any replaced parts that carry coverage
  • Review seasonal maintenance items, such as filter care and outdoor unit clearance, that keep the system running well between visits
  • Explain how our Comfort Club maintenance plan can organize those seasonal checks for you

Common Repairs

Ductless Parts and Problems Our Technicians Service

  • Indoor Blower Service

    A weak or noisy indoor blower can leave a room under-served even when the outdoor unit runs well. We check the motor, its wiring, and the control signal before recommending any repair.

    Ask about indoor blower service
  • Outdoor Compressor Diagnosis

    Compressor trouble often appears as a unit that hums, struggles to start, or never reaches its setpoint. We test the electrical supply, the start components, and the refrigerant circuit.

    Talk with our team about compressor concerns
  • Refrigerant Line Set Leak Checks

    A low charge reduces heating and cooling in every zone served by the outdoor unit. We check pressures, inspect the connections, and look for the source of a leak where it can be reached.

    Request a refrigerant check
  • Condensate Drain and Pump Clearing

    A blocked or badly sloped drain can cause water damage and shut down a zone. We clear the line, confirm its slope, and test any condensate pump that is installed.

    Report a drainage problem
  • Remote and Controller Repair

    When a remote or wall controller stops communicating with its indoor unit, the cause may be the controller, its batteries, or the receiver in the indoor unit. We test each part in turn so the repair targets the right device.

    Ask about controller diagnostics
  • Outdoor Fan and Capacitor Service

    A slow or stopped outdoor fan can disrupt pressures and reduce capacity in all zones at once. We inspect the fan motor, blades, mounting, and the capacitor under load before deciding on a repair.

    Schedule an outdoor fan check
  • Filter and Coil Cleaning

    A dirty filter or coil restricts airflow and makes each zone work harder than it should. We clean the indoor coils and drain pans as needed and show you how to care for the filters between visits.

    Book a coil cleaning visit
  • Electrical Disconnect and Wiring Checks

    Loose connections and worn wiring can cause intermittent faults that are hard to trace. We inspect the disconnect, the control wiring, and the connections at both ends of the system.

    Discuss an electrical check

Common Questions

Mini-Split Repair Questions Answered

Whole-Home Comfort

Related Comfort Equipment Across the Home

Some ductless problems overlap with other parts of a home comfort system, so these related pages may also help you plan. Each one describes what a visit involves.

Technician beside a YORK® air conditioner outside a home

Customer Reviews

What Aurora Homeowners Say About Us

Our reputation was built one service call at a time. Here’s what our neighbors in Aurora and the surrounding area have to say about working with Heller Heat & Air.

Communities We Serve

Mini-Split Repair Across Our Service Area

Heller Heat & Air repairs and maintains mini-split systems for homeowners in Aurora, our home base, and in the communities below. For every location, visit the service area overview, or see our Aurora services page for work in Aurora itself. Choose the community nearest you to see its local services page, then contact our office to plan a visit.

Heller Heat & Air service van

Additional Communities Served

Don’t see your town listed? We regularly travel beyond these communities, so give us a call and we’ll let you know if we can help.

Next Steps

Your Aurora Ductless Repair Contractor

A ductless system gives each room its own comfort controls, and a repair that tests every zone is the only way to know what is really failing. At Heller Heat & Air, we bring 40+ years of industry experience, LG Premier Dealer knowledge, and an honest approach to every visit. We explain the reasons behind each recommendation so you can decide with confidence.

Whether one room has gone quiet or several zones need attention, our team will walk you through the findings before any work is approved. Reach out to our office when you are ready, and we will answer your questions before anything is scheduled.

Call Us Schedule Service