Ducted Heat Pump Repair & Maintenance in Aurora, MO
When your heat pump stops heating in winter or cooling in summer, or when it is time for its seasonal tune-up, Heller Heat & Air is ready to help homeowners in Aurora and across our service area. A heat pump has to perform in both directions, so our technicians check heating and cooling operation rather than only the mode that prompted your call. We service all brands, and as a YORK® Authorized Dealer we work directly with YORK® heat pump equipment.
What Our Heat Pump Repair Company Brings to Each Visit
A ducted heat pump heats and cools with the same equipment, so a repair visit checks both operating modes before we decide what is failing. A problem that appears only in winter or only in summer still deserves a full look, because the two often share a cause. We want the repair to address the real fault rather than the symptom that brought you to the phone.
Our team brings 40+ years of industry experience to heat pump repair. That experience guides how we check the reversing valve, the defrost control, the outdoor fan, the refrigerant charge, and the electrical parts. We can explain what each reading means for your system in plain terms before any part is replaced.
Before we start a repair, we show you the component we believe is failing, explain why it failed, and describe the work involved. You may ask questions at every stage and decline any recommendation. Our aim is for you to understand your heat pump well enough to decide with confidence.
Several heat pump components can produce similar symptoms, so we test before we replace. If a capacitor or defrost sensor is the cause, we say so, and if the problem is a larger component, we explain that too. Our recommendations follow the measurements taken during your visit.
We service all brands, so the nameplate on your outdoor unit does not decide whether we can help. As a YORK® Authorized Dealer, we also know YORK® heat pump equipment well, which helps us interpret its controls and test points. You can read more about our company background before you call.
Heller Heat & Air is an Aurora Chamber of Commerce member and BBB Accredited. Those affiliations are public, and we are glad to explain what they mean for your repair. Asking who will visit your home and how the work will be explained is always a fair question.
Tell Us What Your Heat Pump Is Doing
Describe the symptoms you have noticed, whether the trouble shows up in heating, cooling, or both, and the best way to reach you, and our team will follow up to plan your visit. Our technicians come to your home to test the system, so the details you share help them arrive prepared. If you are still weighing options, you can also review heat pump installation, all of our ducted heat pump services, or central AC repair.
Reach Out to Our Team
Flexible HVAC Financing in Aurora, MO
Synchrony financing makes it easier to move forward with a new air conditioner, furnace, heat pump or mini-split without putting your whole budget on hold. You can apply online in a few minutes, or contact our team and we’ll walk you through your options.
Comfort Club
$159 A Year- Spring safety & efficiency inspection
- Fall safety & efficiency inspection
- Prevent most breakdowns before they occur
- Computerized service history of all equipment
- 10% discount on all parts and labor for all repairs
- Priority service
- Bonus bucks
If you have more than one system, add $30 per additional system
Ready to Get Started?
Contact Heller Heat & Air today to schedule service or ask a question. We’re here to help keep your home comfortable all year.
Symptoms That Point to a Heat Pump Problem
These are the patterns that most often mean a heat pump needs a professional look.
Heating Output Falls Off in Cold Weather
When the house struggles to reach the thermostat setting during the coldest days, the heat pump may be losing capacity. Airflow restrictions, a low refrigerant charge, or a failing compressor can each produce that pattern. Note whether the supply air feels weaker than it did last season.
Ice That Returns After Defrost
A defrost cycle should melt the frost on the outdoor coil and then end. If ice keeps forming, covers the whole cabinet, or returns soon after each defrost, the defrost control, its sensor, or the refrigerant charge may need attention. Do not chip at the ice with tools, and contact our office so we can find the cause.
Slow or Odd Switching Between Heating and Cooling
When the system takes too long to change modes, or it seems stuck in one mode after you change the thermostat, the reversing valve or its control signal may be at fault. A heat pump should switch cleanly, so a long delay or a repeated clunk at changeover is worth a closer look. Describe the mode it sticks in and any sound at changeover.
Backup Heat Running for Long Stretches
Auxiliary heat is meant to supplement the heat pump during very cold weather or defrost. If backup heat runs for long stretches on milder days, the heat pump itself may be underperforming, or the thermostat may be calling for backup heat too early. A diagnostic visit can separate normal operation from a developing fault.
Short Cycling or Nonstop Running
A system that turns on and off in short bursts, or one that runs without ever reaching the setpoint, is working harder than it should. Short cycling can come from a faulty thermostat, an airflow restriction, or a failing electrical component. Nonstop running can point to a refrigerant issue or a system that has lost capacity.
Water or Ice at the Indoor Air Handler
Water pooling around the indoor air handler, or ice building on the indoor coil, often means the condensate drain is blocked or airflow is restricted. Standing water can damage flooring and encourage mold if it is left alone. Turn the system off at the thermostat before the visit, and note where the water appeared and when.
From the First Symptom to a Verified Repair
A heat pump repair follows a sequence that checks both heating and cooling before any part is changed. The five steps below describe how our team approaches each visit from start to finish.
Symptom and Operating-Mode Review
We start by learning which mode the system struggles in and how the problem shows up. That information points the technician toward the right components before any panels are opened.
- Record whether the trouble happens in heating, cooling, or both
- Note the outdoor temperature when the problem appears and whether it comes and goes
- Review any error codes or flashing lights on the thermostat or control board
- Check the thermostat settings, including the changeover setting and any backup heat settings
- Gather the model and serial numbers from the outdoor unit and indoor air handler when they are available
- Plan the visit around the symptoms so the technician arrives ready to test both modes
Two-Mode Operating Check
Our technicians come to your home and run the heat pump through heating and cooling. Comparing readings in both directions shows whether a problem is confined to one component or shared across the system.
- Run the system through a heating cycle and observe how defrost begins and ends
- Run the system in cooling mode and compare the temperature split across the indoor coil
- Watch the changeover between modes for delay, noise, or incomplete switching
- Measure airflow at the supply registers and inspect the return grille and air filter
- Check the outdoor fan operation, the capacitor, and the contactor under load
- Note any reading outside the expected range before moving on to component tests
Component Testing and Diagnosis
Once the operating check points toward a cause, we test the specific components that could produce the symptoms. We do not replace parts until the measurements support that decision.
- Test the reversing valve operation and the control signal that drives it
- Inspect the defrost control, the defrost sensor, and the condition of the outdoor coil
- Evaluate the refrigerant circuit for signs of a leak or an improper charge
- Check the compressor’s electrical supply, start components, and running behavior
- Test the auxiliary heat controls and the sequence that brings them on
- Inspect the condensate drain, drain pan, and indoor coil for blockage or buildup
Explaining the Findings Before Any Work
After diagnosis, we explain the findings in plain language and before any part is approved. You make the decision with the facts in front of you, not with a sales pitch.
- Show you the failing component and describe its role in heating and cooling
- Explain the likely cause and whether other components may be affected
- Outline the repair options and the work each one involves
- Separate repairs that are needed now from those that can wait
- Say plainly when a repair would not make sense for an aging system
- If the approved work is a larger investment, review financing options with you
- Answer every question before you approve any work
Two-Mode Test, Written Record, and Warranty Documentation
Before we leave, we confirm that the heat pump operates correctly in both modes and document the work. A clear record helps you and any future technician understand the system’s history.
- Record the operating readings taken before and after the repair
- Confirm heating output, cooling output, defrost, and changeover during the final test
- Provide a written summary of the work completed and the parts replaced
- Share manufacturer warranty information for any replaced parts that carry coverage
- Review the maintenance items that keep both seasons running well
- Confirm how to reach our office with questions after the visit
Heat Pump Components We Diagnose and Repair
Reversing Valve Service
The reversing valve directs refrigerant so the heat pump can heat or cool, and a sticking valve can block mode changes. We test its operation and control signal before recommending a repair.
Ask about reversing valve serviceDefrost Control and Sensor Repair
A faulty defrost control or sensor can cause too much defrost, too little, or lingering ice. We test the sequence and sensor readings first.
Request a defrost system checkOutdoor Fan Motor Service
A noisy, slow, or stopped outdoor fan can disrupt pressures and reduce capacity in both modes. We inspect the motor, blades, mounting, and electrical supply.
Schedule an outdoor fan repairCompressor Testing and Repair Planning
Compressor trouble often shows up as a unit that hums, struggles to start, or never reaches setpoint. We test electrical supply, start components, and the refrigerant circuit.
Talk with our team about compressor concernsRefrigerant Charge and Leak Checks
A low charge reduces heating and cooling capacity in both modes. We check pressures, look for leaks where possible, and explain the options.
Request a refrigerant checkAuxiliary Heat Control Checks
If backup heat controls or sequencing fail, the home may run cool or the backup may run too long. We test the controls and thermostat signals.
Ask about auxiliary heat controlsElectrical Start Components
A weak capacitor or contactor can keep the compressor or fan from starting. We test both under load and replace only what is failing.
Discuss an electrical component repairCondensate Drain and Indoor Coil Service
A blocked drain or dirty indoor coil reduces heat transfer and can cause water damage. We clear the drain and clean or repair the coil as needed.
Report a drainage problem
Heat Pump Repair Questions Answered
First, confirm the thermostat is set to heat and that its changeover setting matches your equipment. If the system still switches the wrong way, the reversing valve, its control signal, or the thermostat wiring may be at fault. Turn the system off and contact our office so a technician can test the controls safely.
Sometimes a sticking reversing valve can be freed up or its solenoid coil replaced, and sometimes the valve itself must be replaced. The right path depends on testing and the equipment’s age and condition. We check the valve, its solenoid, and the control signal before recommending a repair. Each option is explained in plain terms.
Frequent defrost can come from a defrost control that is set or working incorrectly, a sensor that reads coil temperature wrongly, or airflow problems that let frost build faster than normal. A normal defrost is brief, and heating resumes afterward. If defrost runs often or lasts too long, have the control and sensor tested so the cause is confirmed before any part is replaced.
A heat pump must hold the correct charge in heating and cooling, so we check pressures and temperatures in both modes. A low charge can reduce capacity in either direction and may point to a leak. We look for the source where possible and explain whether a repair is practical. We adjust charge only when testing shows it is needed.
Heat pump components share electrical circuits, airflow, and refrigerant, so one weak part can stress another. A failing capacitor may overheat a motor, or restricted airflow may freeze the coil. We look for the root cause and any connected damage before deciding on work. You hear about each finding separately, so you can choose which repairs to approve.
Manufacturer warranty terms vary by part, equipment, and registration, so we cannot promise coverage for every component. We keep a written record of the parts we replace and share the warranty information that applies to them. Keep your original paperwork and service history together. Ask us about coverage before approving work if it matters to you.
Many older heat pumps can still be repaired, but the answer depends on the cost of the repair, the rest of the system’s condition, and how often it has needed service. We will tell you plainly when a repair makes sense and when it may not. Our installation team can also walk you through new equipment.
Many heat pump control boards and thermostats use codes or flashing lights to report faults. Codes differ by brand and model, so note the code, the time it appeared, and what the system was doing. The model number helps us look up its meaning. Share those details when you contact our office.
In many cases, yes. A heat pump needs a thermostat that supports its heating and cooling modes, its backup heat staging, and its changeover sequence. During a repair visit we check thermostat settings, wiring, and signals. If the thermostat is the problem or cannot control the system properly, we explain your options clearly.
A repair visit fits when something is not working or not performing as it should. A tune-up fits when the system runs but you want both seasons checked. Many homeowners combine the two, and our Comfort Club maintenance plan is one way to keep those visits organized. We will recommend whichever visit matches what we find.
Other Comfort Systems Our Team Repairs
Some heat pump problems overlap with other parts of a home comfort system, so these related pages may also help you plan. Each one describes what a visit involves.
-
Central air conditioning repair
Diagnosis and tune-ups for central AC systems with existing ductwork.
-
Furnace services
Heating equipment we install, repair, and maintain for homes in our service area.
-
Mini-split systems
Ductless heating and cooling for individual rooms and additions.
-
Package unit services
Heating and cooling housed in one outdoor cabinet.
-
Air filtration and air cleaners
AprilAire options for cleaner indoor air.
What Aurora Homeowners Say About Us
Our reputation was built one service call at a time. Here’s what our neighbors in Aurora and the surrounding area have to say about working with Heller Heat & Air.
Heat Pump Repair Across Our Service Area
Our heat pump technicians cover the towns below, starting from our Aurora home base. For every location, visit the service area overview, or see our Aurora services page for work in Aurora itself.
- Aurora HVAC service
- Mount Vernon HVAC service
- Monett HVAC service
- Shell Knob HVAC service
- Marionville HVAC service
- Verona HVAC service
- Pierce City HVAC service: contact us
- Purdy HVAC service: contact us
- Miller HVAC service: contact us
- Crane HVAC service: contact us
- Billings HVAC service: contact us
- Leann HVAC service: contact us
Additional Communities Served
Don’t see your town listed? We regularly travel beyond these communities, so give us a call and we’ll let you know if we can help.
Keeping Your Heat Pump Dependable With a Heating and Cooling Contractor in Aurora
A heat pump that is not heating or cooling as it should deserves a careful, two-mode diagnosis and a clear explanation before any work begins. At Heller Heat & Air, we bring 40+ years of industry experience, YORK® Authorized Dealer knowledge, and an honest approach to every repair and tune-up. Many heat pump problems are straightforward once the cause is found, and the rest deserve patient testing before any decision is made.
If your system needs attention, or you are ready to book a seasonal tune-up for both heating and cooling, reach out to our office and we will get you scheduled. We can also talk through whether a repair or a new system makes more sense for your home, and we will answer your questions before anything is approved.
