Package Unit Heating & Cooling in Aurora, MO
Heller Heat & Air installs, repairs, and maintains package units for homeowners in Aurora and across our service area. A package unit houses heating and cooling together in one outdoor cabinet, so the condition of that cabinet shapes your comfort in every season. We approach each visit by checking how the system runs, explaining what we find, and laying out the choices that fit your home. As a YORK® Authorized Dealer, we work with YORK® equipment, and we service all brands, so the nameplate on your current unit does not decide whether we can help.
Why Aurora Homeowners Choose Our Package Unit Company
A package unit places both functions in a single outdoor cabinet instead of dividing them between indoor and outdoor equipment. That layout changes what a technician has to check, so we test the cooling and heating sides during each visit rather than only the one that prompted your call.
Heller Heat & Air was established in 2001 and has 25+ years in business. A package unit is a long-term investment, and a steady track record gives you a clearer picture of who will install, repair, and maintain it. You can read our company background before you reach out.
Our team brings 40+ years of industry experience to package work. That background shapes how we check the compressor, condenser coil, blower, and controls, and how we describe the results in terms you can act on.
As a YORK® Authorized Dealer, we work directly with YORK® equipment and understand how its components are matched to ductwork, thermostats, and controls. When you compare options, we explain how capacity and airflow affect how evenly your home stays comfortable.
We service all brands, so a package unit from another manufacturer is welcome for a diagnosis. We explain what is failing, what each repair would accomplish, and whether it makes sense before any replacement discussion begins.
Reach Out to Our Team
Flexible HVAC Financing in Aurora, MO
Synchrony financing makes it easier to move forward with a new air conditioner, furnace, heat pump or mini-split without putting your whole budget on hold. You can apply online in a few minutes, or contact our team and we’ll walk you through your options.
Comfort Club
$159 A Year- Spring safety & efficiency inspection
- Fall safety & efficiency inspection
- Prevent most breakdowns before they occur
- Computerized service history of all equipment
- 10% discount on all parts and labor for all repairs
- Priority service
- Bonus bucks
If you have more than one system, add $30 per additional system
Ready to Get Started?
Contact Heller Heat & Air today to schedule service or ask a question. We’re here to help keep your home comfortable all year.
Choose Your Package Unit Visit
Each package unit service has its own page, so you can see what a visit involves before you reach out.
Package Unit Installation and Replacement
Our installation page explains how we assess your home’s heating and cooling needs, match the unit to your ductwork and thermostat, plan the removal and setting, and walk you through startup.
Explore package unit installationPackage Unit Repair and Maintenance
Our repair and maintenance page covers how we diagnose a package unit that is not heating or cooling your home evenly, along with the seasonal tune-up that prepares it for both seasons.
See package unit repair and maintenanceAnswers About Your Package Unit
A package unit is a single outdoor cabinet that houses the heating and cooling components together. A split system divides those components between an outdoor condenser and an indoor air handler or furnace. Package units are often chosen for homes where indoor space for equipment is limited. We review your layout, ductwork, and comfort goals before recommending either type, and we explain the trade-offs honestly.
Package units are typically set on a level concrete pad at ground level, although the right spot depends on your home’s layout, required clearances, and access for service. The supply and return connections must reach your ductwork, so we review those routes before recommending a location. Keeping the pad level and clear of debris helps the unit run quietly and drain properly.
Many homes without a basement or attic use a package unit because its equipment sits outside. Whether it fits your home depends on your existing ductwork, the outdoor space available, and the heating and cooling you want. We measure the space, review how air moves through the home, and explain whether a package system or another arrangement makes the most sense for your situation.
Because the cabinet sits outdoors, weather, road salt, lawn chemicals, and moisture can slowly wear its metal and protective finish. Light surface rust is common, but flaking, holes, or rust near the coil or base can signal a problem. Corrosion can also weaken the cabinet’s ability to protect the components inside. We inspect the cabinet, base, and panels, then explain whether the finish can be addressed or repair or replacement should be considered.
A package unit heats your home with a heating section built into the same cabinet that cools it in summer, so one system covers both seasons. The heating source depends on your installed equipment, and we confirm how your unit produces heat before recommending any work. Routine checks on heating components, airflow, and controls help the unit deliver steady warmth when cold weather arrives. We explain what we find so you can plan ahead.
A package unit tune-up covers both halves of the system in one visit. On the cooling side, we check the outdoor coil, refrigerant levels, and condenser operation. On the heating side, we inspect the heating components, safety controls, and airflow through the blower. We also test the thermostat, clean or replace the filter, and check the condensate drain. Members can review the Comfort Club maintenance plan for ongoing visits.
Sometimes, but not always. A replacement can often reuse existing ductwork when the new unit’s airflow fits the duct system, but we measure before we promise it. We review duct sizes, supply and return connections, and the pad location, and we explain whether ductwork changes would improve how evenly your home heats and cools. If you decide to replace, Synchrony financing is one option we can review with you.
In many cases, a home can move from a split system to a package unit, but the conversion usually involves more than swapping equipment. The outdoor cabinet needs a suitable location, the indoor air handler may be removed, and the ductwork must connect to the package unit’s supply and return. We review those details during a consultation and explain what the project would involve, including any changes to your ductwork.
Stop running the system if you notice ice on the refrigerant lines, a hissing sound, or cooling that fades over time, then call our office so we can inspect it. A refrigerant leak must be located and repaired before the system is recharged, because adding refrigerant without fixing the leak only restores performance for a short time. We test the circuit, explain what we find, and outline the repair options.
Keep grass, leaves, shrubs, and stored items at least as far from the cabinet as the manufacturer’s clearance guidelines require, so air can move freely through the coil. Check the pad for debris after storms, and note any change in sound, vibration, or airflow. Ask our team before cleaning the coil yourself, because the wrong method can bend fins or damage components.
Keep Your Home Comfortable Year-Round
Some homeowners weigh a package unit against a split system or a ductless option, so these related pages may help you plan. If you want help choosing, contact our office and we will walk you through the options.
-
Central air conditioning
Central cooling for homes with existing ductwork, installed, repaired, and maintained by our team.
-
Ducted heat pumps
Heating and cooling through existing ductwork, with YORK® equipment.
-
Furnace services
Heating installation, repair, and maintenance for all brands we service.
-
Mini-split systems
Ductless heating and cooling for rooms, additions, and zones.
-
Air filtration and air cleaners
AprilAire options for cleaner air throughout the home.
What Aurora Homeowners Say About Us
Our reputation was built one service call at a time. Here’s what our neighbors in Aurora and the surrounding area have to say about working with Heller Heat & Air.
Communities We Reach With Package Unit Service
Aurora is home base for our package unit team. Visit the Aurora services page for local details, or see the service area overview for every community we serve.
- Aurora HVAC service
- Mount Vernon HVAC service
- Monett HVAC service
- Shell Knob HVAC service
- Marionville HVAC service
- Verona HVAC service
- Pierce City HVAC service: contact us
- Purdy HVAC service: contact us
- Miller HVAC service: contact us
- Crane HVAC service: contact us
- Billings HVAC service: contact us
- Leann HVAC service: contact us
Additional Communities Served
Don’t see your town listed? We regularly travel beyond these communities, so give us a call and we’ll let you know if we can help.
Your Aurora Package System Contractor
A package unit carries your home’s heating and cooling in one cabinet, so every decision about it affects both seasons. At Heller Heat & Air, we bring 40+ years of industry experience, YORK® Authorized Dealer knowledge, and an honest approach to every installation, repair, and maintenance visit. We explain the reasoning behind each recommendation so you can decide with confidence.
Whether you are planning a replacement or need help with the unit you have, our team will walk you through your options. Send us your questions when you are ready, and we will answer them before any work begins.
