Heller Heat & Air provides furnace installation service

Furnace Installation and Replacement

Furnace Installation in Aurora, MO

Heller Heat & Air installs furnaces for homeowners in Aurora and across our service area. A furnace is the heating system many households rely on through the coldest months, so a new one deserves careful planning before anything is removed. We begin by learning how your home holds and loses heat, then we match the furnace to your ductwork, blower, and thermostat. As a YORK® Authorized Dealer, we work with YORK® equipment directly, and we service all brands. Our goal is a furnace that fits your home.

Why Work With Us

A Furnace Company That Sizes Before It Sells

Gas furnace and insulated ductwork in a basement

Your Furnace Project

Send Us the Details of Your Furnace Project

Tell us about the rooms that are hardest to heat, how old the current furnace is, and whether the ductwork has changed since it was installed. Let us know if you are replacing a central air system at the same time. Our technicians come to your home to evaluate the space. The more we know about how the home feels now, the more precisely we can plan the new system. If you are still weighing your options, you can also review our furnace repair and maintenance services, all of our furnace services, or central air conditioning installation.

Reach Out to Our Team

Homeowners reviewing financing options with an HVAC advisor
Synchrony

Flexible HVAC Financing in Aurora, MO

Synchrony financing makes it easier to move forward with a new air conditioner, furnace, heat pump or mini-split without putting your whole budget on hold. You can apply online in a few minutes, or contact our team and we’ll walk you through your options.

Heller technician with a tablet inspecting a YORK® furnace

Comfort Club

$159 A Year
  • Spring safety & efficiency inspection
  • Fall safety & efficiency inspection
  • Prevent most breakdowns before they occur
  • Computerized service history of all equipment
  • 10% discount on all parts and labor for all repairs
  • Priority service
  • Bonus bucks

If you have more than one system, add $30 per additional system

Heller technician checking an outdoor air conditioner with refrigerant gauges

Ready to Get Started?

Contact Heller Heat & Air today to schedule service or ask a question. We’re here to help keep your home comfortable all year.

Installation Steps

How a Furnace Replacement Comes Together

A furnace installation is planned in stages, and you review each decision before the crew moves forward. The steps below show what happens from the first conversation through the handoff, so you know what to expect at every point of the project.

Heating Needs and Current Furnace Review

We begin by learning how the home performs today. Knowing where heat is lost and which rooms struggle helps us decide what a new furnace has to deliver. Every answer you give is recorded, so the plan reflects what you told us. Contact our office to schedule this review.

  • Ask how each room feels in winter, including rooms that run cold or uneven
  • Review the age, condition, and service history of the current furnace
  • Note the thermostat location and any drafts that could skew the reading it gives
  • Check the ductwork for leaks, disconnected runs, or branches that are undersized
  • Record the comfort goals that matter most to your household
  • Explain the findings in plain language before any sizing decision is made

Furnace Sizing and Blower Matching

A furnace that is too large or too small for the home will not heat evenly, no matter how carefully it is installed. We match heating output, airflow, and blower settings to the house you have, then explain the reasons behind each choice. Our goal is a furnace that fits the home rather than one chosen for convenience.

  • Calculate the heating needs of each zone instead of relying on the old furnace’s size
  • Compare the heating output of each option with the airflow the ductwork can deliver
  • Match blower speed and settings to the duct system and the filter you plan to use
  • Confirm that the thermostat and controls work with the furnace you select
  • Separate the features that change comfort from the extras that add cost without much benefit
  • Share the sizing summary in writing so you can see how each figure was reached

Venting, Fuel, and Electrical Connections

Every furnace has to connect safely to the home’s fuel supply, its electrical service, and, when the equipment burns fuel, a properly sized venting path. These connections are where careful workmanship matters most, so we review them before installation day rather than discovering problems during the work. Each connection is checked and documented before the furnace is energized.

  • Confirm the venting route, clearances, and termination the new furnace requires
  • Check the fuel supply line and the connection points at the furnace
  • Verify the electrical circuit, disconnect, and wiring the furnace needs
  • Plan any drain or pipe routing that the chosen equipment requires
  • Identify any upgrade, such as a new circuit, before work begins
  • Share the connection plan with you before the crew starts

Old Furnace Removal and Setting the New Unit

Installation day is coordinated work inside your home. We protect the areas the crew will use, remove the old furnace with care, and set the new unit so it sits level and stable for years of service. The crew works from the layout you approved, so any change is made with your agreement.

  • Protect floors, walkways, and nearby finishes before any work begins
  • Disconnect the existing furnace from its ductwork, vent, fuel, and electrical connections
  • Set the new furnace level, with the clearances and access the equipment requires
  • Connect the supply and return ducts and seal each joint
  • Complete the fuel, venting, and electrical connections from the plan you reviewed
  • Clean the work area and remove packaging and debris before the crew leaves

Startup Checks and Homeowner Education

Before we leave, we start the furnace, check how it operates, and walk you through the controls. A clear handoff makes a new furnace easier to live with from the first day, and we want you to understand the system you now own.

  • Run the furnace through a full heating cycle and confirm ignition and the safety controls work as designed
  • Check airflow at the registers and the temperature rise through the unit
  • Confirm the thermostat controls the furnace as intended and that each room holds its setting
  • Show where the filter sits, how to check it, and how often it should be changed
  • Explain what normal operating sounds are and which changes should prompt a call to our office
  • Review how our Comfort Club maintenance plan can organize seasonal visits after startup

Good to Know

Furnace Installation Questions Answered

Related Comfort Options

Systems That Work Alongside Your Furnace

A new furnace often works alongside other equipment in the home, and many households compare several options before they choose. Each option has a different role, and our team can explain where each one fits a home like yours. If you want help comparing them, contact our office and we will walk you through the differences.

Technician beside a YORK® air conditioner outside a home

Customer Reviews

What Aurora Homeowners Say About Us

Our reputation was built one service call at a time. Here’s what our neighbors in Aurora and the surrounding area have to say about working with Heller Heat & Air.

Where We Install Furnaces

Furnace Installation Across Our Service Area

Heller Heat & Air installs furnaces for homeowners in Aurora, our home base, and in the communities below. Visit the Aurora services page for local work in Aurora, or review the service area overview for every community we serve. Choose the community nearest you to see its local services page, then contact our office to plan your new furnace.

Heller Heat & Air service van

Additional Communities Served

Don’t see your town listed? We regularly travel beyond these communities, so give us a call and we’ll let you know if we can help.

Your Next Step

Your Home’s New Furnace, Planned by a Heating Contractor

A new furnace should be planned around the rooms it heats, the ductwork that carries its air, and the household that depends on it every winter. At Heller Heat & Air, we bring 40+ years of industry experience, YORK® Authorized Dealer knowledge, and an honest approach to every replacement. We explain the reasons behind each recommendation so you can decide with confidence.

Good planning makes installation day calmer for everyone in the house. Whether you are replacing an aging furnace or adding heat to a new part of the home, our team will walk you through the options. Reach out to our office when you are ready, and we will answer your questions before any work is scheduled. We will explain each option in plain language, so you can compare them with confidence.

Call Us Schedule Service