Package Unit Installation in Aurora, MO
Heller Heat & Air installs package units for homeowners in Aurora and across our service area. A package unit places heating and cooling in one outdoor cabinet, so a replacement decision affects your comfort in every season. We start by reviewing your home, your ductwork, and the pad where the new cabinet will sit, then recommend equipment that matches how the house actually performs. As a YORK® Authorized Dealer with 40+ years of industry experience, we work directly with YORK® equipment and service all brands.
Two Seasons, One Cabinet: What a Careful Package Install Should Include
A package unit delivers heating and cooling through the same cabinet and the same airflow, so the sizing decision has to account for both seasons. We review your home’s heating and cooling needs, the existing ductwork, and the pad before we recommend a unit, so the equipment works through the whole year rather than only on the hottest or coldest day. Those figures come from measured conditions in your home, not from a standard tonnage chart.
Our team brings 40+ years of industry experience to every installation. That background shapes how we look at airflow, cabinet placement, duct transitions, and the small details, such as drain routing and pad leveling, that decide whether a new cabinet runs the way it was designed to run. Experience is what lets us explain a recommendation before you commit to it.
A package unit is only as good as the air path connected to it. We check supply and return sizing, duct transitions, and any restrictions in your current ducts, then explain which changes would improve how evenly your rooms heat and cool. You approve any duct work before it is done, so nothing changes in your home without your review. Those checks happen before we finalize the equipment list, so the proposal reflects what your ducts can actually carry.
As a YORK® Authorized Dealer, we work directly with YORK® equipment and understand how those systems are matched and installed. We service all brands, so we can compare YORK® with the other options in plain language. Our recommendation is the equipment that fits your home, and we will say so plainly when a repair makes more sense than replacing the cabinet. You can review our company background before you reach out.
Heller Heat & Air is an Aurora Chamber of Commerce member and BBB Accredited. Those affiliations are a matter of public record, and we are glad to explain what they mean in practice. Before you choose a replacement, ask us how we work with homeowners on installation day, from the first call through the final walkthrough. Those affiliations reflect how we want to be held accountable to the community, and we welcome questions about how we operate.
Heller Heat & Air was established in 2001. Installation days involve coordinated work inside and outside your home, so we plan each appointment carefully and confirm the schedule with you before the crew arrives. You will know who is coming to your home, and you can review the written proposal before anything is ordered.
Tell Us About the Package Unit in Your Home
Share a few details about your home, the package unit you have now, and the result you want, and our team will follow up to plan your installation with you. Let us know roughly how old the current cabinet is, which rooms feel hardest to keep comfortable, and whether your ductwork has changed since the unit was first set. Our technicians come to your home to evaluate the space and the pad. If you are still weighing your options, review package unit repair and maintenance, all of our package unit services, or Synchrony financing options before you reach out to our office.
Reach Out to Our Team
Flexible HVAC Financing in Aurora, MO
Synchrony financing makes it easier to move forward with a new air conditioner, furnace, heat pump or mini-split without putting your whole budget on hold. You can apply online in a few minutes, or contact our team and we’ll walk you through your options.
Comfort Club
$159 A Year- Spring safety & efficiency inspection
- Fall safety & efficiency inspection
- Prevent most breakdowns before they occur
- Computerized service history of all equipment
- 10% discount on all parts and labor for all repairs
- Priority service
- Bonus bucks
If you have more than one system, add $30 per additional system
Ready to Get Started?
Contact Heller Heat & Air today to schedule service or ask a question. We’re here to help keep your home comfortable all year.
From Site Survey to a Running Package Unit
Replacing a package unit touches the cabinet, the ductwork, and the pad at the same time, so we sequence the work around those three pieces. Each stage ends with a check-in, so you know what has been completed before the next step begins.
Site Survey and Pad Location Check
Before we select equipment, we walk the property to understand the space the cabinet will occupy and the route the supply and return will follow. Contact our office to schedule the survey.
- Measure the existing pad and confirm that the replacement cabinet fits within the clearances it needs
- Check the outdoor space for access, landscaping, and the distance to the existing utility connections
- Inspect the cabinet base and surrounding ground for rust, settling, or water pooling that should be corrected
- Note where the supply and return connect to the ductwork so we can plan each transition
- Discuss your comfort priorities, including rooms that run warm in summer or cold in winter
- Identify any existing problems that should be corrected before a new cabinet is set
Package Unit Selection and Duct Match
Equipment choice follows the survey. We compare options with you in plain language, and we size the unit to the house and its ductwork rather than copying the tonnage of the unit coming out. You will see the reasons for each recommendation in the written proposal.
- Compare YORK® equipment with the other brands we service, explaining the differences in plain terms
- Match the cabinet’s capacity to the measured heating and cooling needs of the home
- Confirm that the existing duct sizes can deliver the airflow the replacement requires
- Review the controls, thermostat compatibility, and accessories you want included
- Explain how the heating and cooling sides of the cabinet depend on the same airflow
- Provide a written proposal that spells out the equipment, the scope of work, and the sequence of steps
Ductwork Adjustments and Air Quality Add-Ons
Ductwork changes are discussed and approved before any cutting or sealing begins. Air quality add-ons are reviewed at the same time, so they can be planned into one coordinated job.
- Inspect supply and return ducts for leaks, disconnected joints, and undersized runs
- Plan any sealing or duct changes and review them with you before work begins
- Confirm that the return air path can supply the airflow the new cabinet will move
- Discuss AprilAire air filtration if it fits your goals for cleaner air
- Protect floors, furniture, and walkways so the work area stays orderly each day
- Agree on the work schedule with you so your household knows what to expect
Removal, Setting, and Connections
The old cabinet comes out, the new one is set on the pad, and the connections are made in a deliberate order. Each connection is checked before the next one is made, so nothing is left to chance. Our crew keeps you informed at each phase and checks in with you before moving on to the next one.
- Recover refrigerant from the existing system before any lines are disconnected
- Remove the old cabinet and handle its components according to the plan we agreed on
- Set the new cabinet on a level pad with the clearances the equipment requires
- Connect the supply and return to the ductwork, and secure each transition
- Make the electrical, thermostat, and condensate drain connections, checking each one before power is restored
- Clean the work area and leave the site tidy once the crew has finished
Startup Testing and Homeowner Handoff
Before we leave, we test both halves of the package unit and walk you through how the system works. Ask every question you have during the walkthrough, because a well-explained system is easier to live with.
- Start the system and verify cooling performance, airflow, and the temperature difference across the coil
- Test the heating side in its own mode and confirm that the safety controls respond as they should
- Review thermostat settings, the filter location, and the filter size the new cabinet requires
- Explain what normal operation sounds like on both heating and cooling calls
- Hand over installation documentation so you have a record for the years ahead
- Review how the Comfort Club maintenance plan keeps a new cabinet tuned for both seasons
Package Unit Installation Questions Answered
A package unit moves air through the same ducts every day, so the cabinet and ductwork must work together. A unit sized only to the house can still underperform if the supply and return runs are too small or leaky. We measure the home, review the duct layout, and confirm the airflow matches what the new cabinet requires before any work begins.
Every package unit needs a properly sized electrical supply and wiring that matches the installed equipment. We check the existing service during the survey and explain whether any upgrades are needed before the new cabinet goes in. Connections are verified before power is restored, and thermostat wiring is confirmed during startup.
Return air carries the conditioned air back out to your rooms, and a restricted return can starve the blower and reduce comfort. Undersized grilles, closed-off returns, or undersized filters cause problems a new cabinet will not fix on its own. We check the return path during the survey and confirm the filter size the system needs.
Approved duct sealing and modifications are completed before the new cabinet is connected, so the supply and return transitions join finished ductwork. The sequence appears in your written proposal, and any change that affects the house is discussed with you first. This order keeps the job organized and avoids connecting the cabinet to ducts that still need work.
Refrigerant is recovered from the existing system before any lines are disconnected, following the handling practices required for that work. Once the old cabinet is out, we set and connect the new one and test the system before it goes into service. You will hear what we found and what was done during the startup walkthrough.
Setting and removing a cabinet means moving equipment across the yard, so we plan the path before the crew arrives. We protect walkways, keep the route clear of shrubs and decorative stones, and discuss any landscaping feature in the way before anything is moved. We walk the yard with you during the final review.
The condensate drain carries moisture away from the cabinet, so it must be connected correctly. During installation we confirm the drain route, check the outlet position, and make sure water cannot pool against the pad or foundation. We check the drain during startup by running the system and watching the outflow. If the route needs a change, we explain it first.
The technicians and crew members who plan and complete your installation come to your home for removal, setting, and connections. You will know who is coming before the day arrives, and the team keeps you updated as each phase is completed. Scheduling and proposal questions go to our office, giving you a direct line to your project team.
We offer financing through Synchrony, and our team can explain how the application works before you decide. The lender makes the final credit decision, so approval is never something we can promise in advance. Review any payment option against your complete project plan, including duct work and startup testing, so the payment matches the full scope of the job.
Often, yes. AprilAire air filtration and humidification options can be planned during the same visit, so the cabinet, ductwork, and filter size are coordinated from the start. We review your goals for cleaner air and whether a filter or humidifier fits the house. You can also compare AprilAire humidifiers and dehumidifiers.
Related Systems Worth a Closer Look
Some homeowners weigh a package unit against a split system or a ductless option, so these related pages can help you compare before you decide. Each option has different strengths, and we explain the trade-offs honestly before you choose.
-
Central air conditioning installation
Split-system cooling for homes with existing ductwork, an indoor coil, and an outdoor condenser.
-
Ducted heat pump installation
Heating and cooling through one ducted system, planned around your home’s layout.
-
Furnace installation
Heating equipment sized, vented, and connected for the home.
-
Mini-split installation
Ductless comfort for additions, individual rooms, and homes with limited ductwork.
-
Rooftop unit installation
Light commercial rooftop systems up to 25 tons for business buildings.
What Aurora Homeowners Say About Us
Our reputation was built one service call at a time. Here’s what our neighbors in Aurora and the surrounding area have to say about working with Heller Heat & Air.
Communities We Serve From Aurora
Heller Heat & Air installs package units for homeowners in the communities below. Aurora is our home base, so begin with the Aurora services page, or review the service area overview for every location we serve. Each community link leads to the local services overview for that city.
- Aurora HVAC service
- Mount Vernon HVAC service
- Monett HVAC service
- Shell Knob HVAC service
- Marionville HVAC service
- Verona HVAC service
- Pierce City HVAC service: contact us
- Purdy HVAC service: contact us
- Miller HVAC service: contact us
- Crane HVAC service: contact us
- Billings HVAC service: contact us
- Leann HVAC service: contact us
Additional Communities Served
Don’t see your town listed? We regularly travel beyond these communities, so give us a call and we’ll let you know if we can help.
Planning a Package Unit Replacement With an Aurora Heating and Cooling Company
Choosing a new package unit is a larger comfort decision than most homeowners expect, because one cabinet carries both your heating and your cooling. At Heller Heat & Air, we bring 40+ years of industry experience, YORK® Authorized Dealer knowledge, and straightforward recommendations to every installation, and we explain the reasoning behind each choice so you can decide with confidence.
If you are ready to plan the work, reach out to our office to schedule your site survey. Our team will walk through the options with you and answer every question before any work is scheduled. We explain each decision in plain language, including why one option fits your home better than another.
